Meridian Temple City ConcreteMeridian Temple City Concrete(323) 471-6288

Concrete pool decks in Temple City CA - a deck that grips wet feet and sheds water

Slick spots, puddles that sit, or cracks where the deck meets the pool? We build a deck that drains right and grips underfoot.

Concrete pool deck with patterned paving, a central fire pit seating area, retaining wall, and blue swimming pool.

What goes into a good concrete pool deck in Temple City?

A concrete pool deck in Temple City is the slab you walk on around your pool, and because it stays wet and gets walked barefoot, a good one grips your feet and sends water away from both the house and the pool.

Most calls start with an old deck that's slick when wet, holds puddles or has cracked along the pool, or with a new pool that needs a deck around it. The price moves with the deck's size, the finish you pick and how much drainage work it takes to get water going the right way, and the schedule usually turns on the city's review more than on our crew. I measure at the estimate and write up exactly what your price includes.

California's contractor licensing board counts forming, pouring, placing and finishing flat concrete as concrete contractor work, which is what a pool deck is, and we're fully licensed and insured to do it.

  • We build the walking surface around your pool, from the pool's edge out to the yard.
  • Finish choice comes early, since texture decides how well the deck grips wet, bare feet.
  • Deck drains, when your design calls for them, get set before the pour so water has somewhere to go.

What happens after you call us about a pool deck?

I come out to every estimate myself, and our own small crew does the work with me running the pour. Here's how a pool deck goes from your first call to the walk-through at the end.

  1. Call or send the form

    Call (323) 471-6288 or use the form, and we'll get back to you by phone or email to set a time for me to come out. Tell us if a pool designer is involved, since their drawings shape the deck.

  2. I measure and look it over

    I measure, take photos and look at where water runs now and how the deck meets the pool. You get a written estimate that spells out the work and what the price includes, so you know what you're paying for before anything starts.

  3. We check the city, then pour

    Before we pick a start, we figure out which office covers your address, because its review comes before any work. On pour day I check the forms one more time, and our crew pours and finishes the deck.

  4. Walk the finished deck together

    When we're done, I walk the deck with you and go over how to care for it while it cures and after. Your satisfaction, guaranteed.

How we build a concrete pool deck

Before we form anything, we settle where the water will run and which finish grips under wet, bare feet, because both are hard to change once the concrete is down. Then we dig out and pack the subgrade, the ground and base the slab sits on, set forms to the slope we planned, and pour when the day is cool, since midday heat can leave a weak, dusty top. Where the deck meets the pool, we leave the joints the pool designer drew and don't tie the deck into the shell, the pool's built structure, because the two can move differently. After finishing, we let the slab cure, which is the wait while it hardens and gains strength. If the budget gets tight, I'd rather you save on the finish than on the base, because the base is buried on day one and it's what keeps the deck from settling with the dirt.

Pool projects often bring other concrete work with them. If the yard drops toward the pool or you step down from a back door, we can build concrete steps in the same plan so the grades line up, and if the project includes a pool house or an addition that needs a slab under it, our slab foundation building work covers that base.

  • Broom finish

    A broom dragged across the wet concrete leaves fine ridges that give bare feet something to grip, and it's usually the plainest and least costly finish for a deck. It suits owners who want a clean, simple look with solid traction.

  • Exposed aggregate

    The top layer is washed away to show the small stones in the mix, which leaves a rougher, pebbly surface. It suits owners who want more texture and color underfoot and don't mind the extra labor it adds to the price.

Get a written price for your pool deck

Send the deck's rough size, what's there now and any plans from your pool designer, and we'll reply within one business day. I'll then come out for a free on-site estimate, with no obligation.

(323) 471-6288

Pool deck questions we hear in Temple City

These are the questions I hear most before a pool deck goes in. Where a rule or a maker's instruction decides the answer, I've said whose it is.

How much does a concrete pool deck cost in the Los Angeles area?

A concrete pool deck in the Los Angeles area usually costs about $5 to $15 per square foot of deck. That's the going range around here, not our price, and where yours lands depends on its size, the finish and the drainage it needs. The written estimate from my visit spells out what your price includes.

What is the best finish for a pool deck you walk on barefoot?

The best finish has enough texture to grip wet feet in a color that won't get too hot, because broom, textured, exposed aggregate, coatings, overlays and decorative systems all differ in traction and surface heat. Very dark finishes can get uncomfortable in sun, which you notice fast without shoes. We weigh grip next to looks with you at the estimate.

How do I keep water on my pool deck from running toward the house?

Slope the deck away from the house, and away from the pool or into deck drains if the design has them, so dirty runoff stays out of the pool water. A slab that falls toward the house sends every splash at your walls. We set the forms to that plan before any concrete arrives.

Will a new concrete pool deck crack?

A few fine cracks are normal in new concrete, and the goal is to keep them tight and in planned places. We cut control joints, shallow grooves that give the slab a chosen place to crack, on time, because joints cut late or skipped leave cracks wherever the concrete picks. Along the pool, the designer's edge joints do the same job between deck and shell.

How often does a concrete pool deck need resealing?

One sealer maker says film sealers need recoating every 18 to 24 months, while penetrating sealers last three to five years but bring out less color. So you're trading a richer look for more frequent recoating. The same maker says foot traffic is fine the day after sealing, while furniture, pool chemicals and heavy gear should wait 72 hours.

Who handles the permit paperwork for a pool deck in Temple City?

We help you find the right office for your address and put together what it asks for, but whether your deck needs a permit is that office's call, so we ask before setting a start. If the work changes the fence, wall or hedge around your pool, the city's zoning summary calls for a 5-foot height and points owners to the Building Department for more requirements.

Concrete pool decks in Temple City and nearby cities

Temple City's Building & Safety issues permits, and new paving or a new pool also needs Planning approval before plans go in for building review, so we ask first. We do the same work in Arcadia and San Gabriel.

(323) 471-6288Get an estimate